Re: I need some WG 6100 help

Found the problem over the weekend, reversing the two transistors blew the
3A 250v fuse on the monitor board, replaced it after swapping the
transistors and the monitor works great!

One minor new problem (after installing the cap kit) the X axis barely
scales down far enough on the screen, and I can't adjust it further down
using the pot on the PCB.

Any ideas?

Thanks!
-Dan

----- Original Message -----
From: "Dans" <dansmsn@msn.com>
To: <vectorlist@synthcom.com>
Cc: <dans@oz.net>
Sent: Thursday, February 08, 2001 4:45 PM
Subject: I need some WG 6100 help

> Earlier this week I thought I'd tidy up a jittery display by installing a
> complete cap kit from Zanen, alas, upon power up the spot killer now comes
> on and the screen only displays a horizontal line. Looks like I killed
the
> vertical deflection somehow!
>
> Tore it apart last night and discovered that I inadvertently switched two
of
> the transistors on the bottom of the chassis. Put them in their proper
> places and powered the unit up but it still has the same problem.
>
> What should I check next? Did I toast the transistors?
>
> Thanks!
> -Dan
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Feb 19 17:16:54 2001