RE: Tempest board problems

I have a very similar problem as Walt. Here's a pic of the output of MY
board:

http://coinop.vintagegaming.com/misc/tempest.jpg

This is the gameplay demo in attract mode. I started it up in self-test but
it only trips the spot killer. No beeps are to be heard either. I replaced
all of the socketed chips with known good ones and I still get this picture.

Any suggestions? The DACs are good, as are the ALU chips.

Brian

-----Original Message-----
From: owner-vectorlist@synthcom.com
[mailto:owner-vectorlist@synthcom.com]On Behalf Of Walt
Sent: Monday, February 26, 2001 1:33 PM
To: vectorlist@synthcom.com
Subject: Re: VECTOR: Tempest board problems

Yep - see the description. All IC's in the vector section (DACs included)
were socketed by a previous owner. I verified the sockets and the IC's as
working and good.

----- Original Message -----
From: Jon Raiford <raiford@mindspring.com>
To: <vectorlist@synthcom.com>
Sent: Monday, February 26, 2001 11:27 AM
Subject: Re: VECTOR: Tempest board problems

> Did you verify the DAC's? The first picture there looks a lot like a DAC
problem.
>
> Jon
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Feb 26 17:08:52 2001