>
> Now CC will work with either the g08-105 or the WG 19k6401. I'm assuming
> all
> games came with -105's installed? for the -105, the resistors at R4, R12,
> R20 on the game board are 3.3k. For the 6401 the resistors are 2.7k to
> reduce the color output signal levels.
You've got that backwards. From the manual: "Use of the ELECTROHOME monitor
requires the replacement of the 3.3K ohm resistors at R4, R12 and R20 on the
game Processor board with 2.7K ohm resistors to reduce the color output
signal levels." Out of the five Processor boards that I've seen in the last
2 months
all had 2.7K resistors. I wonder if they ever built a CC with a K6401?
Dave
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Mar 6 21:28:45 2001
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:01 EDT