Not sure why they would ask you about mounting ears. If you ask for a 19VLUP22
it will, by definition, have ears. If it didn't it would no longer be a
19VLUP22.
Jenison Mark-QA3578 wrote:
> Use the web interface for them
> (www.catalog.rell.com/rellecom/home/cat_home.asp). Do a quick search for
> 19VLUP22. This is how I ordered my last WG6100 tube, and it came exactly
> how I wanted it.
>
> > -----Original Message-----
> > From: Lewis Mills [mailto:lmills01@home.com]
> > Sent: Monday, March 26, 2001 6:41 PM
> > To: vectorlist@synthcom.com
> > Subject: VECTOR: Tube ears?
> >
> >
> > OK, this one is probably obvious to many of you, but it threw
> > me for a loop.
> > I was on the phone with the folks at Richardson, ordering a tube for a
> > WG6100, and the sales woman asked me if I wanted it with or
> > without ears. If
> > I wanted ears, she wanted measurements. I had to beg off;
> > told her I'd get
> > back to her. I just looked at a tube I have here, and I'm
> > guessing that the
> > ears are the metal "L" brackets on the front corners tucked
> > under the metal
> > strap that wraps around the tube. These brackets are bolted onto the
> > monitor frame. Is that right? If so, what measurements do
> > they need for it?
> > Has anybody ordered one of these tubes from Richardson, and
> > what did you do
> > about the ear measuremnt? I need it for a Tempest upright, if
> > that matters.
> > Thanks,
> > Lewis
> >
> >
> > --------------------------------------------------------------
> > -------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please
> > direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Sat Mar 31 14:37:11 2001
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:24 EDT