Re: deflection circuit schematics

Robert,
I think (somebody with more knowledge than I please correct me if I'm
wrong!) that it is 27-28 volts. This is the way I understand the WG6100
schematic found at
http://www.arcademonitors.com/~rgvac/manuals/monitors/K6100_Manual_3rd.pdf.
I hope that helps.
Lewis

----- Original Message -----
From: "Robert Mudryk" <rob@lasers.org>
To: <vectorlist@synthcom.com>
Sent: Wednesday, April 04, 2001 6:40 PM
Subject: Re: VECTOR: deflection circuit schematics

> I need to know what the specs for driving the magnets are first.. to know
if it
> will work... I know of ranges of 12-48V amplifiers... hopefully it's in
the
> 5-12V range... the boards I found were closed loop 24V 5A Amplifiers..
and
> some of the parts are no longer produced. Get me some specs to work with
:)
>
>
> Lewis Mills wrote:
>
> > Hi,
> > Peter, thanks for the reply. I hope I'm not being dim, but are you
> > suggesting that I build a deflection board from the WG6100 schematics?
> > That's definitely a possibility, but I thought Robert Mudryk was
suggesting
> > something different when he wrote:
> > > what is the voltage for driving the deflector on the tube... I may
know
> > where
> > > you can find some very accurate deflection circuits schematics... any
> > maybe
> > > even some pre-made boards
> > Lewis
> >
> > > > Please let me know where; I'd be very appreciative!
> > > > Lewis
> > > >
> > >
> > > http://www.arcademonitors.com/
> > >
> > >
> > >
> >
> --------------------------------------------------------------------------
> > -
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
in
> > the
> > > ** message body to vectorlist-request@synthcom.com. Please direct
other
> > > ** questions, comments, or problems to neil@synthcom.com.
> >
>
> --------------------------------------------------------------------------
-
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Apr 4 23:13:42 2001