On Tue, 1 May 2001 SVerlander@aol.com wrote:
> My question now is how do they install? I have one Hi-voltage unit that
> it was missing. There are what looks like a cap on each end of the wires
The old ones fit in like a socket. If you can do that, it's ideal.
The new one is bigger though, and usually people solder in it. You will
need some sort of high-voltage insultation -- something that has a
dielectric strength that can handle the 10k+ volts. Normal electrical tape
can handle around 300v, and the HV will burn through it.
I got some high voltage split tubing from a local repair shop. I've also
used the old sockets as insultation.
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed May 2 10:29:02 2001
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:18 EDT