Re: MH Proto Whirly Gig

Lunar Lander analog thrust controller for the impending LL/A/AD multigame! Also,
there is the machined aluminum knob for Cosmic Chasm...

tm

Dan wrote:

> Ah, cr*p, well, I mean cool! But now I need to find another worthy project
> to put all of my new gear to work on, any thoughts out there? What piece of
> hardware would you like to see reproduced?
>
> Nice looking controllers Mark, how long did it take you to get to this
> point?
>
> Thanks,
> -Dan
>
> ----- Original Message -----
> From: "Mark E Davidson" <Burbs1@concentric.net>
> To: <vectorlist@synthcom.com>
> Sent: Sunday, May 13, 2001 8:52 PM
> Subject: Re: VECTOR: MH Proto Whirly Gig
>
> > Yea... I do have the pictures up. and I was working on these again.... I
> have 6
> > done, a new bunch of encoder boards for all the ones I made and enough for
> run
> > #2 The link is
> >
> > http://www.basementarcade.com/arcade/sd/mh/
> >
> > -=Mark=--
> >
> > Dan wrote:
> >
> > > I'm more interested in reproducing the black plastic housing that holds
> the
> > > rollers, not the rollers themselves. The housing have become brittle
> with
> > > time and I know that many are cracked and/or damaged just from folks
> taking
> > > them apart to clean or replace the bearings.
> > >
> > > Although, if there is a need, it would be pretty straight forward to
> > > reproduce the rollers once I get my next project (a CNC lathe) up and
> > > running.
> > >
> > > -Dan
> > >
> > > ----- Original Message -----
> > > From: "Tom McClintock" <tomm@mgcap.com>
> > > To: <vectorlist@synthcom.com>
> > > Sent: Saturday, May 12, 2001 7:10 AM
> > > Subject: Re: VECTOR: MH Proto Whirly Gig
> > >
> > > > Dan:
> > > >
> > > > Mark Davidson has already machined up a number of the MH rollers.
> Mark -
> > > still
> > > > have those pictures up?
> > > >
> > >
> >
> > --------------------------------------------------------------------------
> -
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > > ** message body to vectorlist-request@synthcom.com. Please direct other
> > > ** questions, comments, or problems to neil@synthcom.com.
> >
> >
> > --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon May 14 09:12:14 2001