RE: Removing CP Overlays

Does your aircraft remover work with noisy low flying jet planes as much as
items that are standing still?

(ok, back on topic now...)

John :-#)#

At 02:03 PM 23/05/2001, you wrote:
>I helped a friend strip the paint off his car with aircraft remover.
>You paint it on and the clear coat, paint, and primer all bubble off and
>leave shinny metal behind.
>
>-jeff
>
>(we talked about how cruel it would be to fill a fire extinguisher with the
>stuff and drive by a Lexus lot)
>
>-----Original Message-----
>From: someotherguy [mailto:someotherguy@mediaone.net]
>Sent: Wednesday, May 23, 2001 2:54 PM
>To: vectorlist@synthcom.com
>Subject: Re: VECTOR: Removing CP Overlays
>
>
>I just got through reading the other suggestions, like WD40, Sticker Shock,
>etc. and by far the most interesting one sounds like the Sticker Shock.
>I'll
>have to try that stuff next.
>
>In the past, I've used Aircraft Remover (that's the actual name, carried at
>many auto parts stores) on metal control panels - assuming there's usually
>some
>slight rust anyway, and the thing will need to be sanded and painted.
>Aircraft
>Remover is serious paint remover, the eat-a-hole-through-your-skin type.
>
>Richard
>
>
>Anders Knudsen wrote:
>
> > I'm about to remove an old control panel overlay off my Ast Dlx.
> >
> > So...what does everyone use to get the old sticky goop off?
> >
> > I was thinking acetone or maybe turpentine.
> > But, before I get started I wanted to know what others have used.
> > Successes? Failures?
> > Let me know.
> >
> > TIA,
> > -Anders.
> >
> >
>---------------------------------------------------------------------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed May 23 18:15:44 2001