Re: FYI: Cosmic Chasm control knob information

Hi,

Sorry about that, i was not putting the last part of that link in my
browser....Doh! Yes, that knob looks very very close. What do yall think?
Thanks for your work Roy.

Mark Capps

Chumblespuzz wrote:

> Good find on the website. Check this out:
>
> http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=16136&P=2657,84876,85
> 244&M=PROP&N=1&LG=1&I=47&G=G
>
> The product is color is natural (aluminum) but the picture shows the black
> version. I think we have a match!
>
> -roy-
>
> > -----Original Message-----
> > From: owner-vectorlist@synthcom.com
> > [mailto:owner-vectorlist@synthcom.com]On Behalf Of big dog
> > Sent: Wednesday, June 27, 2001 12:18 PM
> > To: vectorlist@synthcom.com
> > Subject: Re: VECTOR: FYI: Cosmic Chasm control knob information
> >
> >
> > Hi,
> >
> > It looks like Alco knobs is really Alco switch, and it has been
> > bought out by
> > Tyco Int. After looking for about an hour or so I finally
> > narrowed it down, and
> > found the site. The site allows you to go through and set the
> > criteria on what
> > the knob you are looking for should look like, but Im not sure
> > what all the terms
> > mean etc. Im in dire need of one of these, as im sure others are
> > as well, and
> > hoped that maybe someone who understands the terminology better
> > than me can
> > narrow it down on their site. I also think that if that does not
> > work perhaps
> > someone can contact them and brow nose a little for a small
> > batch. Let them know
> > that the legend of Alco knobs lives on:P Below is the link.
> > http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=16136&M=FEA
> > T&LG=1&I=47
> >
> > I hope someone can help,
> > Mark Capps
> >
> > John Robertson wrote:
> >
> > > Might be made by Augat - (Alcoknob series):
> > > http://catalogue.e-sonic.com/cgi-bin/listinglookup?listing=Q012A04
> > >
> > > John :-#)#
> > >
> > > At 08:04 AM 26/06/2001, you wrote:
> > > >Hi all,
> > > >
> > > >I took a few pictures of the Cosmic Chasm control knob because
> > I know of a
> > > >few people out there that are missing theirs.
> > > >
> > > >http://www.enteract.com/~jenison/pics/top.jpg
> > > >http://www.enteract.com/~jenison/pics/side.jpg
> > > >http://www.enteract.com/~jenison/pics/bottom.jpg
> > > >
> > > >The knob was apparently made by ALCO, which makes control
> > knobs. Since the
> > > >knob has a pointer line on it, my guess that this was a
> > generic item from
> > > >their product line (not made specifically for the game). I
> > tried to do some
> > > >leg work the other day to see if I could find it on the web,
> > but no such
> > > >luck (there are too damn many companies named ALCO out there).
> > > >
> > > >If anyone wanted to do some searching around or calling around
> > (I couldn't
> > > >find any info on the company itself), or could maybe find an
> > alternate knob
> > > >which was cosmetically equivalent, there are some people out there that
> > > >would appreciate it.
> > > >
> > > >--
> > > >Mark Jenison
> > > >
> > > >
> > >
> > >-----------------------------------------------------------------
> > ----------
> > > >** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > > >** message body to vectorlist-request@synthcom.com. Please direct other
> > > >** questions, comments, or problems to neil@synthcom.com.
> > >
> > >
> > ------------------------------------------------------------------
> > ---------
> > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > > ** message body to vectorlist-request@synthcom.com. Please direct other
> > > ** questions, comments, or problems to neil@synthcom.com.
> >
> >
> > ------------------------------------------------------------------
> > ---------
> > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Jun 27 09:13:17 2001