Re: Source for SK3998/NTE558 rectifiers?

> Looks like these are my best bet: generic, higher-rated than 2
> of the diodes I'm replacing, same-rated as the third.
>
> Is that good enough? Or do they have to be 1,500V rated as in
> the B&W Vector FAQ?
>
> -Anthony R.
>
> On Thursday, June 6, 2002, at 04:11 PM, Anthony Ramos wrote:
>
>> How does this one sound?
>>
>> RECTRON FAST/SOFT RECOVERY RECTIFIERS
>> DO-41 1.0A 1000V REC
>>
>> mouser.com's page for this product:
>> <http://www.mouser.com/index.cfm?handler=displayproduct&&lstdispproductid=
>> 543273>
>>
>> I couldn't find any non-NTE parts rated > 1,000v.
>>
>> -Anthony
>>
>> On Thursday, June 6, 2002, at 01:34 PM, tom mcclintock wrote:
>>
>> > I think any 1-amp fast recovery diode rated at more than the
>> original
>> > 600V/1,000V should do just fine. I wouldn't necessarily go
>> with the NTE
>> > part...
>>
>> ---------------------------------------------------------------------------
>> ** To UNSUBSCRIBE from vectorlist, send a message with
>> "UNSUBSCRIBE" in the
>> ** message body to vectorlist-request@synthcom.com. Please
>> direct other
>> ** questions, comments, or problems to neil@synthcom.com.
>>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Jun 11 11:41:32 2002