XY deflection Proto

> Allright this is what I think will work the best as far as deflection.
This
> is the design I am using on my Proto right now less the 2 extra
transistors
> on the output.
> Nothing special here pretty much a copy of the 6400 Mark Spath can tell
you
> that ;) ,
> but with cheap transistors. The tip35c and 36c can go up to 100V so if you
> kept adding them, decrease the yoke windings and increase the voltage you
> could probably get what ever slew you wanted. I messed up on the 2 3 ohm
10
> watt resistors scratch that. It needs 2 10 watt .75 or close resistors in
> series. I made more heat putting them the way they are now. The resistors
> not marked are the one's that would have to be adjusted for higher
voltages.
>
> Fred
>
>
>
> http://home.mchsi.com/~jstancliff/wsb/media/26501/site1056_t.jpg.
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Jun 11 20:42:12 2002