Re: XY proto Yoke dilema

I actually thought about this and talked to few people about it this
earlier, but came to the conclusion it would be to much of a botch job and
would be hard to converge and bust necks off in shipping. Plus the yoke
design that I have with the hacked TV yoke is not going to be low enough
inductance for the faster games.

Fred

----- Original Message -----
From: "Curtis H. Wilbar Jr." <vector@hawkmountain.net>
To: <vectorlist@synthcom.com>
Sent: Wednesday, June 12, 2002 8:15 PM
Subject: Re: VECTOR: XY proto Yoke dilema

>
> This may sound "silly", but if the yoke is make for a tube with
> a larger diameter neck, but still the same angle tube, couldn't one
> fabricate a "shim" (flexible (but not crushable) tube segment with a
> slot cut length wise to allow it to compress and grip the tube neck
> or two shims that would do much the same thing) ????
>
> Seems that would be cheaper than having custom yokes made....
>
> -- Curt
>
> >From: "Jilayne Stanclif" <jstancliff@mchsi.com>
> >To: <vectorlist@synthcom.com>
> >Subject: VECTOR: XY proto Yoke dilema
> >Date: Wed, 12 Jun 2002 18:24:31 -0500
> >MIME-Version: 1.0
> >Content-Transfer-Encoding: 7bit
> >X-Priority: 3
> >X-MSMail-Priority: Normal
> >X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
> >
> >Okay men,
> >
> > I got the first real hurldle to cross here. Maybe someone has a good
> >answer as this has come up before I'm sure.
> >
> > Looks like the only new CRT tube's available now are 22mm neck. The
tube
> >I'm looking at uses the same type mask as the 19v's but the new tubes use
> >better phosoher and look better. This is all good, but the bad news.
> >
> > The yoke I planned to use was an easy to modify TV yoke that has
pretty
> >low impedance or I looked at high definition yokes that have low
impedance.
> >This is 28 mm stuff though.
> >
> > The dilema is that any standard low impedance yoke is going to be for
> >the larger neck because of the higher heat generated in the neck at highe
r
> >frequencys. I can't think of any application that would use a low
impedance
> >yoke with a 22mm tube???
> >
> > Anyone have an idea? Anyone have a place that will custom make yokes?
> >
> >Thanks,
> >
> >Fred
> >
> >
>
>---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Wed Jun 12 19:38:46 2002