Re: Electrohome/Sega G08 (G08-003)

Hi Curt,

I have a collection of those boards, what is the chip worth to you? $25US
including postage? Seems fair to me, I kill a board and you get the part...

John :-#)#

At 09:54 PM 09/06/2002 -0400, Curtis H. Wilbar Jr. wrote:

>Any luck finding any old crappy deflection boards for that chip ???
>a cracked/broken pcb that still has that chip populated on it would do
>the trick...
>
>What did you find, anything ?
>
>Thanks,
>
> -- Curt
>
> >X-Sender: a1a96636@mail.telus.net
> >Date: Sun, 19 May 2002 16:23:12 -0700
> >To: vectorlist@synthcom.com, vectorlist@synthcom.com
> >From: John Robertson <pinball@telus.net>
> >Subject: Re: VECTOR: Electrohome/Sega G08 (G08-003)
> >Mime-Version: 1.0
> >
> >Um, yes, I have a lot of spare parts for these monitors....I'll have to
> >check on Tuesday if I have a board that is rough enough that I am willing
> >to swipe the IC. Have you checked the number against the ECG catalog to see
> >if it might have a "real" part number? They often use off the shelf and
> >house number the suckers...
> >
> >John :-#)#
> >
> >At 04:56 PM 19/05/2002 -0400, Curtis H. Wilbar Jr. wrote:
> >
> >
> >>Well, didn't really get much tips from people regarding my
> >>G08 problem, however, I now know that even if there are other
> >>problems, they are temporarily not worth chasing...
> >>
> >>IC600 has bit the dust.... I deslodered it and moved it into a
> >>deflection board (untested) that had proper voltage measurements
> >>at IC600... and with the suspect chip in that board it had bad
> >>voltages as well....
> >>
> >>So, anyone got any spare deflection boards, or even better
> >>IC600 (Electrohome 14-2156-01 (on chip), 14-002156-01 (from
> >>docs), sega p/n 315-00117) ???
> >>
> >>(I'm sure I know the answer, but I might as well ask)
> >>
> >>Thanks,
> >>
> >> -- Curt
> >>
> >>
> >>---------------------------------------------------------------------------
> >>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >>** message body to vectorlist-request@synthcom.com. Please direct other
> >>** questions, comments, or problems to neil@synthcom.com.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Jun 25 11:33:04 2002