Fw: Vectrex Yokes

Hi guys,

http://home.mchsi.com/~jstancliff/wsb/media/26501/site1060_t.jpg

    Vectex Update. Not only do I have a new replacement
yoke, but I have worked out a new deflection circuit that seems to work very well. Check it out and someone please build and confirm results. lm1875t needs heatsink. Bypass caps need to be as close the IC as possible to reduce noise. I only build one so far and used it on the vertical yoke. When I get a chance I will build another for the Horizontal yoke and see if all is good. I used the vectrex for the horizontal and this for the vertical when testing with very good results.

Thanks

Fred K
Juice28

HI guys,

    In my never ending quest to master the XY yoke I have made an excellent replacement for the Vectrex (yeah I know they never go bad, but thats not the point) also I know you guys are not the Vectrex club, but I had to tell somebody ;)

    This is all leading up to the big brother yoke for the new color XY arcade monitor.

    Anyway if anybody wants the skinny on how it's done let me know. I used a wyse 150 yoke. These are still available new or surplus so this is a cheap yoke to hack and make work for the vectrex. I gotta pat myself on the back though.... You can't tell the difference between the picture quality of the original and the modified wyse yoke except I have not adjust the linearity with the little magnets yet to make the edges look perfect ;)

    So now somebody needs to make a replacement circuit for the deflection using LM1875's or some cheap audio amp and get a sub on the tube (although I bet the wyse tube would work fine just need to make a high voltage circuit thats no problem)

    Anyway if you guys are not interested in this let me know and I won't bring up vectrex stuff just arcade stuff.

Thanks,

Fred
juice28

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Wed Jun 26 14:14:51 2002