Re: The plane! The plane!

Hi,
Well, I don't think there are mathbox errors. Since the display is only in
the bottom half of the screen, maybe there is a mathbox error and I can't
see it. I don't see any text on the test screen, not even the switch setting
readouts.

I pulled, not just the PROMs, but every socketed chip on both boards and
lightly cleaned the pins with a pencil eraser and reseated them.

Also re-soldered all the connector pins and checked continuity on all the
wires on the main-aux connector.

I'm tantalizingly close, and not sure what to do next....
Lewis

> -----Original Message-----
> From: owner-vectorlist@synthcom.com
> [mailto:owner-vectorlist@synthcom.com]On Behalf Of MKDUD@aol.com
> Sent: Tuesday, September 18, 2001 12:29 AM
> To: vectorlist@synthcom.com
> Subject: Re: VECTOR: The plane! The plane!
>
>
> In a message dated 9/17/2001 10:53:33 PM Eastern Daylight Time,
> lmills01@home.com writes:
>
> << So, I'm thinking the problem is in the Red Baron aux board. Somewhere
> along
> the line that makes up the X signal. Has anyone seen this problem? >>
>
> Are you getting any mathbox errors? Have you checked all the prom sockets,
> as
> well as the interconnect between the AVG and AUX board?
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Sep 18 19:26:05 2001