On Thu, 10 Jan 2002, Phil Morris wrote:
> It slopes to the left a little
> It looks like it's 'zoomed in' as things are a bit too large so you can't
> see objects which would be at the far edges
See blooming.
Low high voltage, normal cause on B&W monitors is a bad HV diode (the thing
in-line on the red wire between the flyvback and the picture tube.
Cross-ref parts on the XY monitor page at www.gamearcive.com, and in the
soon to be released new version of the XY FAQ.
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Jan 10 07:03:05 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:49 EDT