2114-L2 --- the L is for low power, the 2 is a speed grade. Should
work.
Tim Tewalt wrote:
>
> > The cutoff pots are for setting black level (cutoff) of the CRT....
>
> Aha, thanks Rodger.
>
> Last night, I traced the "no red" problem to the interface board like
> Mark had mentioned. Still no diagnosis for the lack of green though.
>
> One more tidbit... the game locks up and what I presume to be the
> "halt" LED remains lit when I press the "test" switch. So, I'm unable
> to toggle through the self-test screens.
>
> The manual states that this is caused by faulty RAM on the CPU board.
> Would these be the 2114's? Bob Roberts lists some 2114-2L's... would
> these work OK? I'm not sure what the -2L means and all my data books
> are at home.
>
> Thanks,
>
> Tim
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Jan 25 12:14:07 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:50 EDT