Re: Star Wars control panel overlay

 http://www.wmberg.com/

Eric gutierrez wrote:
>
> Is berg manufacturing online?
>
> >From: "Tim Tewalt" <tim@srccomp.com>
> >Reply-To: vectorlist@synthcom.com
> >To: <vectorlist@synthcom.com>
> >Subject: Re: VECTOR: Star Wars control panel overlay
> >Date: Wed, 13 Mar 2002 14:02:09 -0700
> >
> >I cross-referenced one from Berg a while back. Here's a
> >couple clips from old emails:
> >
> > >> Sure, no problem. Looks like the gear is a 24 pitch,
> > >> 14 tooth gear with a .250 inch bore and .250 inch face.
> > >>
> > >> I'm pretty sure I found the part in a Berg Manufacturing
> > >> catalog. If so, the part number is P24A66-14.
> >
> > > I got the gear from Berg last week and got it installed. It
> > > is a perfect replacement and works great!!!! Thanks again for
> > > all of your help. May the Force Be With You!
> >
> >Crud... this is the small gear, isn't it?
> >
> >Tim
> >
> >----- Original Message -----
> >From: "Christopher X. Candreva" <chris@westnet.com>
> >To: <vectorlist@synthcom.com>
> >Sent: Wednesday, March 13, 2002 1:34 PM
> >Subject: RE: VECTOR: Star Wars control panel overlay
> >
> >
> > > On Wed, 13 Mar 2002, Bret Pehrson wrote:
> > >
> > > > I've been casually looking into having these gears reproduced.
> > >
> > > Are they really custom gears ? No chance they are available as a
> >standard
> > > part from someplace like http://www.smallparts.com/ or
> > > http://www.nordex.com/
> > >
> > > ==========================================================
> > > Chris Candreva -- chris@westnet.com -- (914) 967-7816
> > > WestNet Internet Services of Westchester
> > > http://www.westnet.com/
> > >
> > >
> >--------------------------------------------------------------------------
> >-
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> >the
> > > ** message body to vectorlist-request@synthcom.com. Please direct other
> > > ** questions, comments, or problems to neil@synthcom.com.
> > >
> >
> >
> >---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to neil@synthcom.com.
>
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Mar 13 13:31:03 2002