Re: lowest price on H1812 or cross?

Even if the HC diode was shorted it would not blow the fuse...the problem
is elsewhere. Have you recapped the HV unit? Use high frequency caps here -
available from Digi-key.

John :-#)#

At 09:54 AM 06/05/2002 -0700, Anthony Ramos wrote:

>Before I go in with you on the purchase, can you tell me if I really need
>one? Here are my symptoms again:
>
>. HV section blows 1A fuses F101 and F102
>. On Replacing the fuses, HV is good at first, then goes down until fuses
>blow again.
>
>Thanks.
>I wish I had a HV meter to test what's coming out of the diode...
>
>-Anthony R.
>
>Rodger Boots wrote:
>
>>OK guys, here's the deal. I've found someone with H1812 rectifiers and
>>MC1495L ICs for sale. I'm being quoted $12.95 each for the rectifiers
>>(possibly 3 available) and $8.85 each for the MC1495L multipliers
>>(possibly 100 available).
>>Should I try to get either of these? How many?? I need to know soon.
>>Neither one of these part numbers are easily available anymore and even
>>the SK and NTE replacements are getting hard to find.
>>
>>John Robertson wrote:
>>
>>>$12 sounds cheap to me...those aren't exactly readily available any more...
>>>
>>>John :-#)#
>>>
>>>At 05:55 PM 05/05/2002 -0700, Anthony Ramos wrote:
>>>
>>>
>>>>Hi everyone,
>>>>
>>>>My Battlezone is doing the screen bloom thing and the HV section blows its
>>>>1A fuses every week or so...looks like I need a new HV diode.
>>>>
>>>>Arcadeshop.com has the SK7330, a cross for the H1812, for $12. Ouch. Any
>>>>place I can get it cheaper?
>>>>
>>>>Thanks,
>>>>Anthony R.
>>>---------------------------------------------------------------------------
>>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>>** message body to vectorlist-request@synthcom.com. Please direct other
>>>** questions, comments, or problems to neil@synthcom.com.
>>---------------------------------------------------------------------------
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to neil@synthcom.com.
>>
>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon May 6 13:59:40 2002