It almost looks like a problem with the DACs. Before you mentioned that it actually clears up for a short period, I was convinced that it was something in the vector output section. It might still be there, but I wouldn't have expected it to ever clear up.
Jon
At 11:25 PM 5/8/2002 -0400, you wrote:
>In a message dated 5/8/2002 10:03:05 PM Eastern Daylight Time, mccullar@flash.net writes:
>
>
>>Do you have an oscilloscope? I recommend looking at the voltages coming out of the 7815 and 7915 regulators. They should be smooth, flat DC (+15 volts and -15 volts). If they're not, check your inputs. What do your + 22 VDC and - 22 VDC look like? Are they wavy as well?
>>
>>Can you verify that the problem is indeed on the motherboard and not coming from the power supply?
>
> Thanks for the response.
>
> Yes, I have a 100mhz scope. Waveforms of the +/-22vdc look fine at the audio reg. Waveforms at the +/-15 v on the board look fine. I'm 100% positive it's the board.
> I have a working Black Widow board that runs fine in this cabinet, so I know the problem is NOT the audio reg or the power supply - (Replaced big blue on power supply about 2 years ago). This cabinet also runs my Space Duel and Major Havoc boards perfectly.
>
> One other thing; in attract mode, the problem will clear up and return at the EXACT same times. Things get normal for a few seconds after the planet zooms in when the player's ship is near the surface. Then, things gets wavy just as the enforcer ship shows up after the player ship explodes on the planet's surface - this is making me think the problem is not AVG related. I can get the problem to return (and produce the symptoms shown in my test mode pics) by manually tripping the reset on the board.
>
>Any more help would be greatly appreciated.
>
>Thanks,
>MK
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu May 9 05:38:34 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:02 EDT