On Sun, 12 May 2002, John Robertson wrote:
> STOP!!!!! TURN OFF THE POWER!!!! YOU ARE DESTROYING THE DRIVER
> TRANSISTORS!!!! NEVER EVER EVER RUN A VECTOR MONITOR WITH THE OUTPUT
> TRANSISTORS UNPLUGGED!!!!
Would this hold if there was no INPUT also ? As in ,powering just a
deflection board with no input ?
I'm thinking of the times I've isntalled an LV2000, where if I recall the
docs say to check it by doing just that. Then again, if everything is
unplugged, I guess the yoke is off too.
-Chris
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon May 13 07:55:02 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:02 EDT