Re: Electrohome/Sega G08 (G08-003)

Um, yes, I have a lot of spare parts for these monitors....I'll have to
check on Tuesday if I have a board that is rough enough that I am willing
to swipe the IC. Have you checked the number against the ECG catalog to see
if it might have a "real" part number? They often use off the shelf and
house number the suckers...

John :-#)#

At 04:56 PM 19/05/2002 -0400, Curtis H. Wilbar Jr. wrote:

>Well, didn't really get much tips from people regarding my
>G08 problem, however, I now know that even if there are other
>problems, they are temporarily not worth chasing...
>
>IC600 has bit the dust.... I deslodered it and moved it into a
>deflection board (untested) that had proper voltage measurements
>at IC600... and with the suspect chip in that board it had bad
>voltages as well....
>
>So, anyone got any spare deflection boards, or even better
>IC600 (Electrohome 14-2156-01 (on chip), 14-002156-01 (from
>docs), sega p/n 315-00117) ???
>
>(I'm sure I know the answer, but I might as well ask)
>
>Thanks,
>
> -- Curt
>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Sun May 19 16:33:03 2002