RE: Gravitar Button Colors

They're longs. Just about all the Atari metal control panels use the longs,
with the thick white plastic switch 'cups' - the short ones are typically
used on Williams wooden control panels without any spacers, just a nut
against the underside of the panel, since the switch is attached to the
panel separately.

Richard

-----Original Message-----
From: owner-vectorlist@synthcom.com
[mailto:owner-vectorlist@synthcom.com]On Behalf Of Louis Srianomai
Sent: Friday, July 12, 2002 3:59 PM
To: vectorlist@synthcom.com
Subject: Re: VECTOR: Gravitar Button Colors

Off the top of my head, I think short, because the metal CP is so thin.
It's
not like you're trying to button down into 1" thick wood CP.

L.

--- Tim Tewalt <tim@srccomp.com> wrote:
> Crud... I forgot to ask if they're the "long" or "short" type.
> Since they mount in a metal control panel that screw into the
> white holders, they're the "long" type, right?
>
> Thanks,
> Tim
>
> > Yes, all yellow leafs.
> >
> >
> > --- Tim Tewalt <tim@srccomp.com> wrote:
> > > I'm restoring a Gravitar, but it is missing buttons.
> > > Are they *all* yellow?
> > >
> > > Thanks,
> > > Tim
>
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Jul 12 13:30:04 2002