Re: Another HV shield question ....

I've never seen a shield for an amplifone. Typically the HV is on one side of
the cab with the deflection on the other. In the case of the CP, both are on
the same side. The CP manual does not show a shield.

The reason why the WG monitor *probably* puts a shield on is due to the
proximity of the HV united to the neck of the tube. The extra RF may interfere
with the guns somehow.

JB

Rodger Boots wrote:

> Dave Langley wrote:
>
> > At 08:32 pm 14 07 02, you wrote:
> >
> >> Granted I haven't seen that many Amplifone monitors, but the ones
> >> I've seen were REALLY spread out. The deflection board was mounted
> >> to one side of the cabinet and the HV was on the other side. Mounted
> >> this way it probably didn't matter if the cage was there. If
> >> everything was mounted close (like a regular monitor) it would make a
> >> difference.
> >
> >
> > Well this was certainly the case in the upright and cockpit Star Wars
> > and since I've never seen the inside of a dedicated Major Havoc I
> > can't say if they are much closer ... anyone care to comment?
>
> Major Havoc was spread out all over the place.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Sun Jul 14 22:19:58 2002