RE: G08 part sources?

Or you can order directly from
http://shop.store.yahoo.com/americanmicrosemiconductor/mpsu10.html.

> -----Original Message-----
> From: Mills, Lewis
> Sent: Tuesday, July 16, 2002 4:23 PM
> To: 'vectorlist@synthcom.com'
> Subject: RE: VECTOR: G08 part sources?
>
>
> Mouser has the 2N6259 for US$7.45
>
> MPSU10 looks like: Vceo=300V, Ic=500mA, hFE@Ic=30mA=30min,
> fT=60MHz, Pd@25c case=10W. You can try an RFQ to American
> Microsemi
> (http://www.americanmicrosemi.com/cgi-bin/rfqentry.cgi?action=
> enterrfq&source=web&link=141292&query=mpsu10).
> It appears to cross to 2N6558, which crosses to MJE340 or
> NTE171, both available from Mouser.
> Lewis
>
> > -----Original Message-----
> > From: owner-vectorlist@synthcom.com
> > [mailto:owner-vectorlist@synthcom.com]On Behalf Of peter jones
> > Sent: Tuesday, July 16, 2002 3:16 PM
> > To: vectorlist@synthcom.com
> > Subject: Re: VECTOR: G08 part sources?
> >
> >
> >
> > -----Original Message-----
> > From: "Mark Jenison" <jenison@enteract.com>
> > To: <vectorlist@synthcom.com>
> > Date: Wed, 10 Jul 2002 13:51:09 -0400
> > Subject: VECTOR: G08 part sources?
> >
> > >
> > > Hi all,
> > >
> > > Has anyone found sources for the following parts?
> > >
> > > MPSU10/NTE191/ECG191/SK3232
> > > 2N6259
> > > Custom IC 600 (would it be possible to engineer a
> > replacement pcb for this
> > > chip?)
> > >
> > > ...or has someone bought up all these in preparation to
> > release the new and
> > > improved G09! ;-)
> > >
> > > --
> > > Mark Jenison
> > >
> > 1st. please stop quoting NTE / ECG numbers, these are not
> real parts.
> >
> > MPSU10 - ?2.00 + tax (u.k.)
> > http://www.grandata.co.uk
> >
> > 300v .5amp NPN (if i new the max frequency i could find a
> > modern equiv)
> >
> > i will check on the other stuff.
> >
> > --------------------------------------------------------------
> > -------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please
> > direct other
> > ** questions, comments, or problems to
> vectorlist-owner@synthcom.com.
> >
>
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Jul 16 14:44:35 2002