Hmmm...transistor socket issues...will check and get back!
John :-#)#
At 09:13 AM 16/09/2002 -0600, Tim Tewalt wrote:
> > > Wondering if anyone has suggestions for the cause of an interesting
> > > distortion on a GO8 I'm restoring (for sale by the way). On my test
> > fixture
> > > it shows insufficient positive deflection on both the X and Y axis. In
> > > other words the picture refuses to go more than 3/4 of the way up the X
>or
> > > Y axis and the image squishes as it reaches this boundary.
> >
> > I have one like this also. When you figure out the solution, let me know
> > what it is :-).
>
>
>Me three. I rebuilt the heatsink (replaced 100 ohm resistors, transistors
>and connectors) and cleaned it all up nice and the problem went away.
>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Mon Sep 16 09:37:04 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:09 EDT