RE: WTB: Star Wars 14-tooth spur gear

Just got the gears in, they are the same as used in the Star Wars yoke
Atari part number 04-040249-01 metal shaft, nylon gear head. If anyone
wants them they are $20US each.

John :-#)#

At 09:25 AM 29/11/2002 -0800, John Robertson wrote:
>Good point, I'll know later today when they arrive - I needed them for
>fixing another game and as they are 14 tooth I assume they might be
>perfect for others. They are NOS perhaps five to ten years old...nylon not
>metal as the new ones from Berg are... (as I understand).
>
>John :-#)#
>
>At 08:23 AM 29/11/2002 -0800, Bret Pehrson wrote:
>
>>Old stock or newly manufactured?
>>
>>I'd think that anything older than 10 years would be ready to explode
>>into pieces after just a little use...
>>
>> > -----Original Message-----
>> > From: owner-vectorlist@synthcom.com
>> > [mailto:owner-vectorlist@synthcom.com] On Behalf Of John Robertson
>> > Sent: Friday, November 29, 2002 7:52 AM
>> > To: vectorlist@synthcom.com; vectorlist@synthcom.com
>> > Subject: Re: VECTOR: WTB: Star Wars 14-tooth spur gear
>> >
>> >
>> > I can get original Atari 14 tooth gears but they will be
>> > $20US each as
>> > well. Is anyone interested? About ten are left.
>> >
>> > John :-#)#
>> >
>> > At 06:53 PM 27/11/2002 -0600, SteveT wrote:
>> >
>> > >The Berg gear will set you back about $20 including shipping.
>> > >BTW you need to set up an account with them first.
>> > >
>> > >Steve
>> > >
>> > >Steven Winslow wrote:
>> > >
>> > > > David !
>> > > >
>> > > > I can confirm that the Berg part # P24A66-14 is a perfect
>> > replacement
>> > > > (better than perfect actually).
>> > > >
>> > > > Steve
>> > > >
>> > > > At 09:44 AM 11/27/2002 -0600, you wrote:
>> > > > >Here's my post from earlier this year, and Rodger's reply.
>> > > > >
>> > > > >tom mcclintock wrote:
>> > > > >
>> > > > > > Anyone good with gears? I need to get some
>> > replacement small gears for
>> > > > > > my Star Wars (yes, I know you are saying don't we
>> > all). There is that
>> > > > > > fancy yoke controller rebuild kit on eBay, but for
>> > $50-$60 plus
>> > > shipping
>> > > > > > it seems a bit much.
>> > > > > >
>> > > > > > Browsing through the manual, I discover that the two
>> > different 'small
>> > > > > > gears' are thus:
>> > > > > >
>> > > > > > Tilt Gear (up and down) - 14-tooth Spur Gear (Atari
>> > Part # 040249-01)
>> > > > > > Pan Gear (left & right) - 28-tooth Spur Gear (Atari
>> > Part # 178101-003)
>> > > > > >
>> > > > > > McMaster-Carr doesn't have a suitable replacement but
>> > Berg certainly
>> > > > > > does :) (www.wmberg.com) However, we now get into
>> > pressure angles,
>> > > pitch
>> > > > > > and pitch diameters, hub, no hub, etc. Not my forte.
>> > Here are the two
>> > > > > > that look most promising (and likely the same ones
>> > that can be found in
>> > > > > > the rebuild kit on eBay).
>> > > > > >
>> > > > > > 14 tooth, 24 Pitch, 1/4" face aluminum spur gear -
>> > Berg Part no.
>> > > > > > P24A66-14
>> > > > > > 28 tooth, 24 pitch, 3/16" face delrin spur gear -
>> > Berg Part no.
>> > > F24D5-28
>> > > > > >
>> > > > > > Anyone able to figure out the exact replacement parts
>> > so I don't
>> > > ruin by
>> > > > > > yoke controller?
>> > > > >
>> > > > >Rodger Boots wrote:
>> > > > >
>> > > > > > If you get the diameters right the pitch should be
>> > correct. For the
>> > > > > > same number of teeth a larger pitch will be a larger diameter.
>> > > > >
>> > > > >
>> > > > >
>> > > > >tm
>> > > > >
>> > > > >
>> > > > >"Fish, David" wrote:
>> > > > >
>> > > > > > Sorry to post a WTB here but I have not received any
>> > response from my
>> > > > > > post in RGVAC. I need a replacement 14-tooth spur
>> > gear for my SW/ESB,
>> > > > > > the gear that controls the up/down movement. There
>> > was a mention of a
>> > > > > > replacement gear that was discussed here a few months
>> > ago but I don't
>> > > > > > recall it. Do we have access to recent archived V-list posts?
>> > > Anyway, I'm
>> > > > > > willing but trade stuff or buy outright. Please email
>> > me at the
>> > > attbi.com
>> > > > > > address below.
>> > > > > >
>> > > > > > Thanks and have a happy Thanksgiving!
>> > > > > >
>> > > > > > David Fish "We
>> > want...Information.
>> > > > > > INFORMATION
>> > > > > > Melrose, MA USA
>> > You won't get it!
>> > > > > > dfish1@attbi.com By hook
>> > or by crook we
>> > > will"
>> > > > > > David.Fish@axcelis.com
>> > _The
>> > > > > > Prisoner_
>> > > > > >
>> > >
>> > --------------------------------------------------------------
>> > -------------
>> > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
>> > > "UNSUBSCRIBE" in the
>> > > > > > ** message body to vectorlist-request@synthcom.com.
>> > Please direct other
>> > > > > > ** questions, comments, or problems to
>> > vectorlist-owner@synthcom.com.
>> > > > >
>> > > >
>> > >-------------------------------------------------------------
>> > ----------
>> > > ----
>> > > > >** To UNSUBSCRIBE from vectorlist, send a message with
>> > "UNSUBSCRIBE"
>> > > in the
>> > > > >** message body to vectorlist-request@synthcom.com.
>> > Please direct other
>> > > > >** questions, comments, or problems to
>> > vectorlist-owner@synthcom.com.
>> > > >
>> > > >
>> > --------------------------------------------------------------
>> > -------------
>> > > > ** To UNSUBSCRIBE from vectorlist, send a message with
>> > "UNSUBSCRIBE" in the
>> > > > ** message body to vectorlist-request@synthcom.com.
>> > Please direct other
>> > > > ** questions, comments, or problems to
>> > vectorlist-owner@synthcom.com.
>> > >
>> > >-------------------------------------------------------------
>> > --------------
>> > >** To UNSUBSCRIBE from vectorlist, send a message with
>> > "UNSUBSCRIBE" in the
>> > >** message body to vectorlist-request@synthcom.com. Please
>> > direct other
>> > >** questions, comments, or problems to vectorlist-owner@synthcom.com.
>> >
>>
>>
>>---------------------------------------------------------------------------
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Nov 29 10:27:37 2002