RE: Re[2]: Significantly drop G2/brightness (4600 raster hack)?

Ah, the wayback machine! That is the original page. I shall put a link to
that on my page...I haven't done a RasterHack since though so am very rusty
on the process of inserting a hack into a game. Been lucky in finding good
HV units for the past few years...

Thanks!

John :-#)#

At 12:33 PM 29/11/2002 -0600, Bachmann, Joe wrote:

>I believe this is the original text:
>
>http://web.archive.org/web/20010412184426/www.flippers.com/vid-tips.html
>
>JB
>
>-----Original Message-----
>From: John Robertson [mailto:jrr@flippers.com]
>Sent: Friday, November 29, 2002 11:27 AM
>To: vectorlist@synthcom.com; vectorlist@synthcom.com
>Subject: Re[2]: VECTOR: Significantly drop G2/brightness (4600 raster hack)?
>
>I still have the original text and pictures. Somewhere....in my archives.
>But this jpg is the same as my old one. I'll dig up the archive files off a
>backup CD from last year if still needed.
>
>John :-#)#
>
>At 06:54 PM 29/11/2002 +0300, peter jones wrote:
>
>
> > > As I recall, John had some
> > > blurb in the *original* raster-hack text about "you might have to add a
> > > resistor..." but the first time I did it, I did not have this problem so
>my
> > > re-write did not include this tip and now John has replaced his original
> > > text with my rewrite. Does anybody have the original text still?
> > >
> >
> >i found this:
> >http://www.angelfire.com/linux/master_user/schema.jpg
> >
> >but i cant host it for long, so please mirror it on IONPOOL or something.
> >
> >---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to vectorlist-owner@synthcom.com.
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Nov 29 12:41:34 2002