Re: Re[2]: Tempest boards playing blind (and worse)...help!

From: Curtis H. Wilbar Jr. <vector_at_hawkmountain.net>
Date: Thu Jan 09 2003 - 22:38:31 EST

Copper tape ? Like the stuff they use inside laptops/etc ?

Will that really stay firmly attached to the PCB ?

-- Curt

>From: "peter jones" <highwayman2000@mail.ru>
>To: vectorlist@synthcom.com
>Subject: Re[2]: VECTOR: Tempest boards playing blind (and worse)...help!
>Mime-Version: 1.0
>X-Originating-IP: 81.78.20.42 via proxy [195.92.168.174]
>Date: Tue, 07 Jan 2003 22:39:30 +0300
>Content-Transfer-Encoding: 8bit
>
>-----Original Message-----
>From: "Curtis H. Wilbar Jr." <vector@hawkmountain.net>
>To: vectorlist@synthcom.com
>Date: Tue, 7 Jan 2003 00:46:50 -0500 (EST)
>Subject: Re: VECTOR: Tempest boards playing blind (and worse)...help!
>
>>
>>
>> Oh, one more tempest thing... I have a spare set of tempest boards that
>> work great... just one problem... no red gun... turns out the pin on the
>> edge connector for the red gun is gone ! peeled right up and off.....
>>
>> Now I don't want to relocate the signal to an unused pin... as that makes
>> it wiring specific....
>>
>> So...
>>
>> Anyone ever restore a missing "pin" ? I was thinking of using one from
>> a scrap board... using a razor blade to peel up a "replacement" one, and
>> epoxying it to the location of the missing "pin" on the tempest board.
>>
>> Comments, ideas, etc welcome.
>>
>> -- Curt
>>
>COPPER TAPE - it used to be used for covering the holes in RF screening cans.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Thu Jan 9 19:38:53 2003

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:18 EDT