Re: DAC80 Questions

Anyone ever use the current version with some extra parts ????

I ended up picking up a couple of the current versions by mistake
once :-(

-- Curt

>X-Sent: 31 Jan 2003 20:27:24 GMT
>Date: Fri, 31 Jan 2003 14:30:06 -0600
>From: Tom McClintock <tomm@mgcap.com>
>X-Accept-Language: en
>MIME-Version: 1.0
>To: vectorlist@synthcom.com
>Subject: Re: VECTOR: DAC80 Questions
>Content-Transfer-Encoding: 8bit
>
>Whee! From my now 11-month old Cinematronics monitor doc that I haven't gotten
>back to....
>
>I hope this means I can get a discount, right Mark? :)
>
>
>-----------------
>The Burr-Brown DAC80 used in the Cinematronics monitor comes in two "flavors";
>the DAC-80-CBI-V "voltage output", and the DAC-80-CBI-I "current output" type.
>
>All Vectorbeam monitors used the voltage version - the DAC-80-CBI-V.
>
>Drop in replacement:
>
>· National Semiconductor DAC1280
>· Burr-Brown DAC800-CBI-V
>· Burr-Brown DAC800P-CBI-V
>· Beckman 7580V (needs some resistors changed)
>· Analog Devices ADDAC80N-CBI-V
>
>Analog Devices (or was it possibly Burr-Brown?) later came out with the
>DAC800-V which was a monolithic part, with better spec's, that was a drop in
>Replacement for the DAC80-V's.
>
>The Beckman DAC (758VS) is not directly compatible with the Burr-Brown DAC-80.
>If using a Beckman 758VS, R101 must be changed to 11.0k 1% metal film, and R201
>must be changed to 7.5k 1% metal film.
>
>
>
>
>big dog wrote:
>
>> Hi,
>>
>> Iam trying to find some DAC80's for Cinematronics monitors. There seem
>> to be quite a few different ones, all burr brown, but with different
>> endings. I was wondering if anyone knew what can and cant be used.
>>
>> Thanks for any help,
>> Mark Capps
>>
>> ---------------------------------------------------------------------------
>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>> ** message body to vectorlist-request@synthcom.com. Please direct other
>> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Jan 31 12:43:29 2003