RE: Quantum bezel measurement/picture help please

Thanks for verifying Steve. When I did try to fit a Tempest bezel, the
sides were pretty good, but the top and bottom were off, especially the
bottom.

FYI, a couple people let me know if I can't get anyone else, they'll do it,
but no one has just far.

Joe

> -----Original Message-----
> From: owner-vectorlist@synthcom.com
> [mailto:owner-vectorlist@synthcom.com]On Behalf Of Steven Gregory
> Sent: Tuesday, April 01, 2003 10:10 AM
> To: vectorlist@synthcom.com
> Subject: RE: VECTOR: Quantum bezel measurement/picture help please
>
> No, this bezel is for a Dig-Dug/Centipede type cabinet, not Tempest.
> The monitor angle is important.
>
> On Tue, 1 Apr 2003 07:08:30 -0600, Joe Magiera wrote:
>
> >I don't think it will work. The one pictured appears to be one from a
> >Tempest. I tried fitting a Tempest bezel in place and it wasn't
> the right
> >size.
> >
> >Joe
> >
> >> -----Original Message-----
> >> From: owner-vectorlist@synthcom.com
> >> [mailto:owner-vectorlist@synthcom.com]On Behalf Of Tom McClintock
> >> Sent: Monday, March 31, 2003 10:38 PM
> >> To: vectorlist@synthcom.com
> >> Subject: Re: VECTOR: Quantum bezel measurement/picture help please
> >>
> >> Wouldn't this one work?
> >>
> >> http://www.arcadeshop.com/pics/atari-upright-black-bezel.jpg
> >>
> >> tm
> >>
> >> On Mon, 31 Mar 2003, "joemagiera" wrote:
> >> >
> >> > I'm trying to make a home made bezel for a Quantum. I
> >> > would like to match
> >> > an original as best I could. If anyone has easy
> >> access
> >> > to a Quantum with an
> >> > original bezel (the cardboard around the monitor) and
> >> a
> >> > digital camera, can
> >> > you please take a couple of pictures and several
> >> > measurements for me?
> >> >
> >> > The picture I would like, is with the front glass
> >> > removed and game off.
> >> > Take a picture that would include the full bezel to
> >> > just beyond where it
> >> > sits in the cabinet so I can see how it sits on the
> >> > cabinet. Remember,
> >> > please don't jam the list with pictures, please send
> >> > directly to my e-mail
> >> > below (or post the link on the web to them).
> >> >
> >> > There are two sets of measurements I could use. The
> >> > first set is eight
> >> > measurements, two from each inside corner of the
> >> bezel.
> >> > Measure from that
> >> > inside corner point of the bezel to the top of the
> >> > bezel and to the side of
> >> > the bezel. I just want to get the length of the
> >> angled
> >> > piece of cardboard,
> >> > not the flat part (the flat part is the piece that
> >> > would be exactly vertical
> >> > when installed). I hope that makes sense. The second
> >> > set is a measurement
> >> > of each of the four sides of the flat part of the
> >> > bezel. I would like to
> >> > get the measurement (height and width) of each of
> >> those
> >> > 4 flat parts of the
> >> > bezel.
> >> >
> >> > FYI, I suspect that the bezel is symmetrical and that
> >> > measuring one vertial
> >> > and one horizontal for each set of measurements I need
> >> > would be enough.
> >> >
> >> > Thanks much!
> >> >
> >> > Joe
> >> > joemagiera@ameritech.net
> >> >
> >> >
> >> ------------------------------------------------------------------
> >> ---------
> >> > ** To UNSUBSCRIBE from vectorlist, send a message with
> >> > "UNSUBSCRIBE" in the
> >> > ** message body to vectorlist-request@synthcom.com.
> >> > Please direct other
> >> > ** questions, comments, or problems to
> >> > vectorlist-owner@synthcom.com.
> >> ------------------------------------------------------------------
> >> ---------
> >> ** To UNSUBSCRIBE from vectorlist, send a message with
> >> "UNSUBSCRIBE" in the
> >> ** message body to vectorlist-request@synthcom.com. Please direct other
> >> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >
> >-----------------------------------------------------------------
> ----------
> >** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
>
>
>
> Steven Gregory
> ArcadeShop Amusements
> sgregory@arcadeshop.com
> http://www.arcadeshop.com
>
>
>
> ------------------------------------------------------------------
> ---------
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Apr 1 08:16:59 2003