RE: Inductor addition and the MC1

I would think so... My 3 10mh coil creation must be close... If someone
has a Q meter, it'd probably be real easy to measure... But, I don't
have one..

JB

-----Original Message-----
From: Christopher X. Candreva [mailto:chris@westnet.com]
Sent: Sunday, April 06, 2003 4:28 PM
To: vectorlist@synthcom.com
Subject: VECTOR: Inductor addition and the MC1

While working on this board, something about the MC1 occurred to me. If
it
is just three inductors in a triangle, doesn't that make it the same as
a
single inductor with a value that can be calculated, or is there going
to be
some other property because of the arrangement ?

If I remember correctly, inductors add with the opposite rule of
resistors,
so the value of 2 inductors in series is 1/Lt = 1/L1 + 1/L2
and 2 inductors in parallel simply add together.

If this is the case, can't we just measure the inductance of an MC1 and
use
an appropriate inductor (or combination if there isn't one available
with
the proper value) ?

-Chris

==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
------------------------------------------------------------------------

---
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.