Re: New High voltage Replacement for 6100

Thanks for fielding these question.

How "maintainable" is it? In other words, if it does break down later, is
it made of commonly available parts, does it use surfice mount devices,
custom parts, etc, ?

BTW, I wouldn't worry about making it work for G08's any time soon; I think
working G08 HV units greatly outnumber the number of working G08 deflection
boards (if only someone would make a replacement for the custom chip on the
deflection board...)

----- Original Message -----
From: "Jilayne Stanclif" <jstancliff@mchsi.com>
To: <vectorlist@synthcom.com>
Sent: Friday, April 11, 2003 8:30 PM
Subject: Re: VECTOR: New High voltage Replacement for 6100

> If you really want to know the Skinny-
>
> It uses a Flyback switching power supply design for the B+ and color guns
> and of coarse the HV Flyback for the High voltage. The Switching Power
> supply samples itself to regulate and a winding of the flyback is sampled
to
> watch for Over voltage.
>
> Fred
>
> ----- Original Message -----
> From: "Zonn" <zonn@zonn.com>
> To: <vectorlist@synthcom.com>
> Sent: Friday, April 11, 2003 7:14 PM
> Subject: Re: VECTOR: New High voltage Replacement for 6100
>
>
> > On Fri, 11 Apr 2003 19:25:22 -0500, "Joe" <jb@joesarcade.com> wrote:
> >
> > >Is there overvoltage protection on this? It didn't quite look like the
> > >one in the pictures had it.
> >
> > Along with overvoltage protection, I'm also interested in how it's
> regulated.
> >
> > -Zonn
> >
>
> --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Apr 11 17:59:06 2003