On Sun, 13 Apr 2003 00:34:37 -0500, "Jilayne Stanclif" <jstancliff@mchsi.com>
wrote:
>Zonn,
>
> Without basically giving the schematics out it is hard to tell you
>exactly how this works. It is a pretty straight forward design though.
>
>You answered your own question with this -
>
>Are there two flyback switchers. One that generates the 180v needed for the
>B+,
>> and then another flyback design that generates the 19.5k based on the 180
>volt
>> primary?
>
> If so, how is the 19.5kv regulated
>
>This is the tricky part of the whole design, but I basically have a circuit
>that changes the pulse width on the hot to regulate the 19.5KVH.
PWM is the way many flybacks are regulated. My concern was that the 19.5k was
indeed regulated and not just open loop based on a regulated input voltage.
Sounds cool, I look forward to seeing the end results. (Installation manual,
etc.)
-Zonn
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Sun Apr 13 13:47:45 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:27 EDT