RE: Battlezone Eproms?

2516's would also work...
 
JB
 
-----Original Message-----
From: John Robertson [mailto:jrr@flippers.com]
Sent: Thursday, July 24, 2003 11:25 PM
To: vectorlist@vectorlist.org; vectorlist@vectorlist.org
Subject: Re: VECTOR: Battlezone Eproms?
 
2716's but check the strapping - some boards might be wired for 2708s.

John :-#)#

At 11:10 PM 24/07/2003 -0700, Mark E Davidson wrote:

Hey Scott,
 You misunderstood me. A friend has a stripped battlezone board that I
wanted to replace the missing Roms with EPROM's, But I don't know what
type to use

-=Mark=-

Scott Brasington wrote:

 
>From MAME.. source code
 
Vector/Mathbox roms:
 
 ROM_LOAD( "036422.01", 0x3000, 0x0800, 0x7414177b
)
 ROM_LOAD( "036421.01", 0x3800, 0x0800, 0x8ea8f939
)
 
Not sure what chip locations.
 
These are the CPU roms
 
 ROM_LOAD( "036414.01", 0x5000, 0x0800, 0xefbc3fa0
)
 ROM_LOAD( "036413.01", 0x5800, 0x0800, 0x5d9d9111
)
 ROM_LOAD( "036412.01", 0x6000, 0x0800, 0xab55cbd2
)
 ROM_LOAD( "036411.01", 0x6800, 0x0800, 0xad281297
)
 ROM_LOAD( "036410.01", 0x7000, 0x0800, 0x0b7bfaa4
)
 ROM_LOAD( "036409.01", 0x7800, 0x0800, 0x1e14e919
)
 
 
 
----- Original Message -----
From: "Mark E Davidson"
<mark@basementarcade.com> <mailto:mark@basementarcade.com>
To:
<vectorlist@vectorlist.org> <mailto:vectorlist@vectorlist.org>
Sent: Thursday, July 24, 2003 5:01 PM
Subject: VECTOR: Battlezone Eproms?
 
 
 
         
        what Eproms are used in Battlezone, on the vector generator PCB?
         
        -=Mark=-
         
        
------------------------------------------------------------------------

---
	** To UNSUBSCRIBE from vectorlist, send a message with
	"UNSUBSCRIBE" in the
	** message body to
	vectorlist-request@vectorlist.org
<mailto:vectorlist-request@vectorlist.org> .
	Please direct other
	** questions, comments, or problems to
	chris@westnet.com <mailto:chris@westnet.com>  .
	 
	   
 
 
------------------------------------------------------------------------
---
** To UNSUBSCRIBE from vectorlist, send a message with
"UNSUBSCRIBE" in the
** message body to
vectorlist-request@vectorlist.org
<mailto:vectorlist-request@vectorlist.org> .
Please direct other
** questions, comments, or problems to
chris@westnet.com <mailto:chris@westnet.com>  .
 
 
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com .