On Tue, 29 Jul 2003, Dave Langley wrote:
> Having looked at the schematics this morning, am I right in presuming that
> if the HVT is giving out volts to the focus/screen block if the screen
> control works but the focus does not? Is there any way to test the focus
> block in/out of circuit ?
It's a pot, so a ohm-meter should do the job nicely.
Also -- I'm going to ask Neil to remove the vectorlist@synthcom.com address
shortly as it DOES get an awful lot of spam, so please remember to use the
vectorlist@vectorlist.org address. Thanks !
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com .
Received on Tue Jul 29 09:27:39 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 11:45:44 EDT