Model 19K640x (from 19K6400 CVM Service manual)
1. INPUT POWER REQUIREMENTS:
Input Voltage
40-0-40 VAC RMS @ 1.75 ARMS (Typical)
6.6 VRMS @ 0.74A (Filament)
Input Voltage Range: +10% to -10% for performance specifications.
Input Power: 140W typical
All secondary windings must be isolated from the power line.
2. SIGNAL INPUTS:
"X" full deflection 8V P/P (+4V to -4V) - 15 inches
"Y" full deflection 6V P/P (+3V to -3V) - 11.25 inches
Red, Green and Blue Drive
Blanking Level........................... 1.0V
CRT Cutoff............................... 1.5V
Low Beam................................. 1.8V
High Beam................................ 3.6V
Max Drive................................ 4.0V
Dave Fish
-----Original Message-----
From: joemagiera [mailto:joemagiera@ameritech.net]
Sent: Wednesday, July 30, 2003 2:18 PM
To: vectorlist@vectorlist.org
Subject: VECTOR: WG6401 AC voltage/transformer requirements?
I keep finding G08_105 info, but I'm not having any luck finding some WG6401
info. Does anyone know of any documentation that states what voltage a 6401
takes/needs? i.e., what isolation transformer I need? I looked through the
6401 manual on spies and it didn't say. I looked through the Aztarac
manual, and unfortunately, it just says "AC power". Any help would be much
appreciated. Thanks,
Joe
joemagiera@ameritech.net
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com .
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com .
Received on Wed Jul 30 15:05:19 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 11:45:44 EDT