I'm trying to avoid the air leaks that cause the friendly arcing sounds
in the HV cage. Anyone know about Molybdenum Grease? I'd rather not
contaminate the area and no one seems interested in disclosing it's
voltage characteristic.
tm
"Christopher X. Candreva" wrote:
>
> On Thu, 4 Dec 2003, Tom McClintock wrote:
>
> > Anyone know of a good source for the HV insulation grease that is
> > applied around the HV diode? I'm having trouble locating something that
> > is HV compatible. Plus I always like subject lines with the word goo in
> > them. ;)
>
> I've never had good luck with the goo. What I've done is use the old socket
> -- cut it, wrap it around, and secure with regular electrical tape.
>
> If you have the old socket, that is.
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Dec 4 17:09:58 2003
This archive was generated by hypermail 2.1.8 : Thu Dec 04 2003 - 20:50:00 EST