If it looks like it's expanding and contrasting constantly, turn the X and Y pots back and forth 10 times. Not 11, not 9, 10 and only 10 will work.
I would begin checking resistors and caps in the area... Also check for bad solder joints on the large diodes in the rectifier section.
JB
-----Original Message-----
From: owner-vectorlist@vectorlist.org [mailto:owner-vectorlist@vectorlist.org] On Behalf Of MyPearl
Sent: Thursday, February 05, 2004 3:31 PM
To: vectorlist@vectorlist.org
Subject: VECTOR: Shaky Star Wars
Waah!
I've got an star Wars w/ amplifone that is driving me *mad*.
The boardset is tested okay.
The problem was with the amplifone monitor, the Y amplifier had two toasted
MPSU07 and MPS57 drivers (tested okay, but caused -12V offset at the
output).
Replacing them corrected the problem and for a day the pricture was
brilliant and stable.
Now suddenly there is a ripple in *both* the X and Youtput, causing the
image to 'wobble' on the outsides.
I can't explain it or find the cause:
- Replaced filter caps on amplifone defl. board
- Replaced the 2n2792 and 3716 pair
- The ripple is present at the bases of the final drive stages of the amp
board.
- There is no ripple on the input of the differential amplifier consisting
of TR1, TR1 and TR3 (2N2904's)
Since the problem arises on both X and Y outputs, Tere should be a common
cause, but that just leaves the rectifier, the filter caps and the
transformer in the power supply. I tested for ground connection and also
tried connecting a direct ground wire from the game board to the amplifone.
There are no dry joints on the defl. board.
Anyone has any good ideas on what can cause this problem?
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
--- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.577 / Virus Database: 366 - Release Date: 2/3/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.577 / Virus Database: 366 - Release Date: 2/3/2004 --------------------------------------------------------------------------- ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org ** Please direct other questions, comments, or problems to chris@westnet.comReceived on Thu Feb 5 20:40:09 2004
This archive was generated by hypermail 2.1.8 : Thu Feb 05 2004 - 22:50:00 EST