Re: Odd G08 behavior after recapping

I'd suggest the fan did it, but of course can't prove it.

Christopher X. Candreva wrote:

>(That was long enough I thought I would put this in a separate post).
>
>Immediately after I recapped the G08, it wasn't working. The image was
>rotating back and forth about +/- 15 degrees from the X axis. After maybe
>20 seconds, the HV would shut down - picture would bloom and start to dim.
>And, the fan wasn't running.
>
>Come back to it the next day, same behavior.
>I pull the monitor and hook it up on the bench to run some tests -- and it
>works fine -- picture steady, stays on, fan runs. It works back in the cab,
>and is still running now 5 days later. I can't duplicate the failure.
>
>Obviously something is loose -- any ideas what ? I'd like to fix it BEFORE
>it starts doing this again, and possibly damages something else.
>
>
>==========================================================
>Chris Candreva -- chris@westnet.com -- (914) 967-7816
>WestNet Internet Services of Westchester
>http://www.westnet.com/
>---------------------------------------------------------------------------
>** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>** Please direct other questions, comments, or problems to chris@westnet.com
>
>
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Feb 21 03:58:24 2004