Re: Some G08 FAQ updates . . .

Christopher X. Candreva wrote:

>On Sun, 22 Feb 2004, Rodger Boots wrote:
>
>
>
>> 3) Keep the monitor power supply voltage where it should be. Line
>>voltage these days is too high and the power transformer doesn't have a
>>tap for it. 125 volts going into a 110 or 115 tap makes for too much
>>voltage to the monitor which makes it run way too hot.
>>
>>
>
>This was aactually my next question, since I believe it's a quote of yours
>in the FAQ about tapping the transformer for 110 volt. What's a good way of
>getting that voltage down then ?
>
>
>

What we did at Showbiz Pizza on an Eliminator was instead of feeding
power to the common and 115 taps we used the 100 and 230 taps.
Probably not the right way to do it, but it "created" a 130 volt winding
which was about what we had at the outlet.

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Feb 23 02:31:35 2004