Re: Putting an unknow condition boards in a working WG6100?

You COULD blow various things, such as the power transistors on the chassis,
or even the HV supply (not as likely).

You need to have an idea of the status of the board you are about the plug
in...

Mendel

----- Original Message -----
From: Scott Goings <sgoings@comcast.net>
To: <vectorlist@vectorlist.org>
Sent: Tuesday, March 09, 2004 2:53 AM
Subject: VECTOR: Putting an unknow condition boards in a working WG6100?

> I have a non working WG6100 and a working WG6100. What are the risks in
> swapping the boards into the working monitor as a trouble shooting aid?
> For instance, If I swap in the deflection board from the non working
> monitor do I risk damaging the working monitor. What about the high
> voltage assembly etc.?
>
> Thanks,
>
> Scott
>
> --------------------------------------------------------------------------
-
> ** Unsubscribe, subscribe, or view the archives at
http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Mar 9 13:24:47 2004