Yes you can. I've done it many times and it works great.
You do not have to load the video B+ (it's actually loaded
with a bleeder in the HV unit).
As always, be careful with the anode lead; it bites!
-Mark
On Wed, Mar 17, 2004 at 09:54:53PM -0000, Steve Coule wrote:
> Is it possible to test a WG HV unit on the bench by supply +/- 28ish volts
> to it and tucking the HV lead into a cardboard box? Does there need to be
> a load on the B line for example? Has anyone tried it?
>
>
>
> It's cold in the garage and all the test gear is indoors!
>
>
>
> Thanks,
>
>
>
> Steve
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Mar 17 21:13:55 2004
This archive was generated by hypermail 2.1.8 : Wed Mar 17 2004 - 21:50:00 EST