RE: WG6100 HV Tech

Swap it into another HV cage that works..

Or, is it arcing?

But, I would check ZD901,2.

JB

-----Original Message-----
From: owner-vectorlist@vectorlist.org [mailto:owner-vectorlist@vectorlist.org] On Behalf Of Scott Goings
Sent: Wednesday, March 17, 2004 8:30 PM
To: vectorlist@vectorlist.org
Subject: VECTOR: WG6100 HV Tech

I have a Space Duel which has a dead monitor. I am only getting 70 to 80
volts on B+. I have installed a Cap kit.

I measured the voltages on Q900 and see 18 to 20 volts on each leg. I
have checked all of the resistors and have done a diode test on Q900.
All check out good.

Tonight I noticed there are some several cracks in the black plastic
case of the HV transformer. How do I determine if the HV transformer is bad?

Thanks,

Scott

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.600 / Virus Database: 381 - Release Date: 2/28/2004
 
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.600 / Virus Database: 381 - Release Date: 2/28/2004
 
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com