Re: Tempest Display Problem (w/links)

Did you check the BIP pot itself? If it's range is off ...

At 09:38 AM 3/29/2004, Andreas Kraemer wrote:
>Hi Chris,
>
>well, I wanted to say that ist is not a BIP _adjustment_ problem as I have
>tried to adjust BIP by using the the crosshair test screen and I didn't
>manage to get the horizontal lines to match. Best case is about 3/4"
>vertical distance between the two horizontal lines, then the vert BIP pot
>is at its end
>
>I'll have a look into this area. Ideas for a strategy are welcome,
>nevertheless ;)
>
>Thanks,
>Andreas
>
>
>
>
>"Christopher X. Candreva" <chris@westnet.com> schrieb:
> > On Sun, 28 Mar 2004, Andreas Kraemer wrote:
> >
> > > Since yesterday my tempest suffers from a display problem. The end and
> > > startpoint of some lines are shifted vertically. Here's a link to two
> > > pictures with the test page. I have increased brightness, so you can see
> > > the beam movements. This is not a BIP adjustment problem...
> >
> > Can I ask -- how to you know it isn't a BIP / Liniarity problem ?
> Because it
> > looks like one.
> >
> >
> > ==========================================================
> > Chris Candreva -- chris@westnet.com -- (914) 967-7816
> > WestNet Internet Services of Westchester
> > http://www.westnet.com/
> > ---------------------------------------------------------------------------
> > ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> > ** Please direct other questions, comments, or problems to
> chris@westnet.com
> >
>
>
>---------------------------------------------------------------------------
>** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>** Please direct other questions, comments, or problems to chris@westnet.com

--
Franklin Bowen (Franklin@Bowen.net)
http://fmbbowen.com:39353 
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com