Pete,
Sounds like the monitor isn't the problem - try reseating the PROMs.
I bet the watchdog is resetting the CPU - causing the display to blank,
thus triggering the spot killer.
Just an observation.
- Matt
prostreet36@rcn.com wrote:
>Hi All
>
>I'm having a problem with a Battlezone. The monitor will
>always work in test mode but when switched to game mode the
>monitor will work for a bit then start switching on and
>off. The spot killer goes on and off with each cycle.
>Here's the "what's done" list:
>
>Recapped monitor and HV unit
>Reflowed solder joints on monitor and interconnect cable
>A/R board modified to eliminate 5V regulation circuity,
>voltage set to 5.1vdc at chips on PCB.
>
>Game was working fine until moved.
>
>Any help would be appreciated.
>
>Thanks in advance,
>Pete
>prostreet36@rcn.com
>---------------------------------------------------------------------------
>** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>** Please direct other questions, comments, or problems to chris@westnet.com
>
>
>
-- ------------------------- Matthew Sell Programmer UNIX System Administrator On Time Support, Inc. www.ontimesupport.com Join the Metrology Software Discussion List METLIST! http://www.ontimesupport.com/metlist.html Growing old is mandatory; growing up is optional. Today's mighty oak is just yesterday's nut that held its ground. --------------------------------------------------------------------------- ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org ** Please direct other questions, comments, or problems to chris@westnet.comReceived on Mon Aug 9 17:22:10 2004
This archive was generated by hypermail 2.1.8 : Mon Aug 09 2004 - 18:50:00 EDT