On Fri, 18 Mar 2005, Joe wrote:
> The Star Trek that I have plugs directly into the board set. No
> fingerboard or top to the cage. I also have an extra top with
I hate Sega.
Page 104 of the dedicated manual shows three (what appear to be) molex
connectors J1, J2, and J3 mounted on a bracket on the outside of the card
cage: http://www.westnet.com/~chris/arcade/ST-p104.gif
Page 132, the cabinet wiring diagram, shows these three plus P9 for the
volume control assembly.
http://www.westnet.com/~chris/arcade/ST-p104.gif
If the dedicated cage doesn't actually have these, but sends the wires in to
connect directly to all the cards in the cage -- then, uh, I dunno, I'll do
something else.
For those keeping score :-) The conversion kit puts a card-edge connector in
the top cover of the card cage, all cabinet wires solder to a finger board,
and that plugs into the top.
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Mar 18 20:21:02 2005
This archive was generated by hypermail 2.1.8 : Fri Mar 18 2005 - 22:50:00 EST
