Are there any markings on the original that would suggest manufacturer
or part number?
Electronicamuse@aol.com wrote:
> As some have heard, I have the 2nd generation HVU board replacement
> for the Amplifone monitor. This is not the WG modded to kinda work,
> but a new board that is the same size as the original Amp. What I
> need is a source for the neckboard connector. I can't find any good
> info about APCO who apparently made the original part for the
> Amplifone. Anybody have suggestions?I am going to dig out some old
> tube rejuvenators that I have and see if any connectors are
> compatible, but wasn't sure if anybody had info.
>
> Thanks
>
> +++++Ask me about Retrocade 30-in-1 MultiPac kits for Midway Pac Man
> and Ms Pac Man boards and same kit already attached to a new JAMMA
> PCB. Also we now have purchased the rights to WG6100 (Tempest, etc)
> new deflection boards and HVU boards. Also HVU boards for Amplifone
> (Star Wars). These are version 2 with no extra wiring or mods
> necessary. Ask about Star Wars overlays and new cabinets for Midway
> cocktail, upright, mini, Dragon's Lair, Williams, Golden Tee Fore, and
> Ultra-MAME++++
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat May 21 03:59:14 2005
This archive was generated by hypermail 2.1.8 : Sat May 21 2005 - 11:50:01 EDT