Re: Amp blooming

This blooming can also be caused if any of the diodes in the HV diode
stack in the flyback are damaged from being discharged by shorting
the anode to ground right after the monitor was powered down. Rare,
but it does happen.

John :-#)#

At 9:49 AM -0600 1/19/06, Rodger Boots wrote:
>Blooming is caused when the high voltage sags due to loading. This
>can happen if brightness is set too high, you might try turning it
>down a bit.
>
>
>utahtaper wrote:
>
>>Can a Wintron fitted HVB still have blooming problems? Doesn't the
>>Wintron replace the diode that causes this? Can someone describe to
>>me what this looks like? I've searched online and found people with
>>this problem but none describe what it looks like when their
>>monitor is doing it.
>>I appreciate it!
>>
>>---------------
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Jan 19 12:38:07 2006