Negative; the 6100 anode voltage is much higher.
On Mon, Apr 10, 2006 at 06:31:59PM -0400, Tony Roussos wrote:
> Joe,
>
> Do you happen to have a scheme of the EHT transformer pinout and associated voltages. I'm hoping I can use a 6100 transformer to work in a 19v2000. They visually look similar. If it will take a comparable input and provide an appropriate output, I would be happy.
>
> Tony
> ----- Original Message -----
> From: Joseph Magiera
> To: vectorlist@vectorlist.org
> Sent: Monday, April 10, 2006 4:34 PM
> Subject: Re: VECTOR: Tempest problems
>
>
> I have to admit I haven't trouble shot yet. I fully planned to this past weekend, but too many family things came up. I did plan on cross testing it with another good Tempest boardset and another good 6101. I'll let the list know results.
>
> Joe
>
> "Christopher X. Candreva" <chris@westnet.com> wrote:
> On Sun, 2 Apr 2006, joemagiera wrote:
>
> > Another game party casualty. After on for a few hours in a warm room with
> > 20+ other games on, my Tempest developed two problems:
>
> Since no one ever answered this I'm going with my standard: Have you
> verified that it is the board or monitor ? I usually just hook up my scope
> in XY mode as a second monitor and compare the two images .
>
> I've seen weird things like this happen when I had loose solder joints in my
> monitor.
>
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Apr 10 20:42:37 2006
This archive was generated by hypermail 2.1.8 : Mon Apr 10 2006 - 21:50:00 EDT